Abstract:Based on CT scans, the C4-C5 cervical segment finite element model for 3 year old child was developed with accurate skeletal geometries and detailed anatomical structures of intervertebral disc. Grounded on biomechanical experiments published of adult cervical spine and the comparison of the data between adult and child, scaling methods were used to calculate the material parameters for 3 year old pediatric cervical spine. The model was validated under quasistatic and dynamic tensile, quasistatic flexion extension, and lateral bending as well as axialrotation loadings. It is indicated that responses for the tensile simulations are consistent with those of the experiments, with the quasi static tensile stiffness of 211.8 N/mm, dynamic tensile ultimate failure force of 759.9 N and ultimate failure displacement of 5.08 mm in simulations. Responses for quasi static bending simulations were within the standard deviation or corridor of the experiments, with the range of motion for extension 9.75°, flexion 9.29°, lateral bending 3.79°and axial rotation 7.04°. It is indicated that this model is biofidelic enough to reflect the biomechanical properties of 3 year old pediatric C4-C5 cervical spine under quasi static and dynamic tensile, as well as quasistatic flexion extension, lateral bending and axial rotation loadings.
[1]Platzer P, Jaindl M, Thalhammer G, et al. Cervical spine injuries in pediatric patients [J]. J Trauma, 2007, 62(2): 389-396; discussion 394-6.
[2]Roche C, Carty H. Spinal trauma in children [J]. Pediatr Radiol, 2001, 31(10): 677-700.
[3]Eleraky MA, Theodore N, Adams M, et al. Pediatric cervical spine injuries: report of 102 cases and review of the literature [J]. J Neurosurg, 2000, 92(1 Suppl): 12-17.
[4]Orenstein JB, Klein BL, Gotschall CS, et al. Age and outcome in pediatric cervical spine injury: 11-year experience [J]. Pediatr Emerg Care, 1994, 10(3): 132-137.
[5]Elias PZ, Nuckley DJ, Ching RP. Effect of loading rate on the compressive mechanics of the immature baboon cervical spine [J]. J Biomech Eng, 2006, 128(1): 18-23.
[6]Ching RP, Nuckley DJ, Hertsted SM, et al. Tensile mechanics of the developing cervical spine [J]. Stapp Car Crash J, 2001, 45: 329-36.
[7]Luck JF, Nightingale RW, Loyd AM, et al. Tensile mechanical properties of the perinatal and pediatric PMHS osteoligamentous cervical spine [J]. Stapp Car Crash J, 2008, 52: 107-134.
[8]Ouyang J, Zhu Q, Zhao W, et al. Biomechanical assessment of the pediatric cervical spine under bending and tensile loading [J]. Spine (Phila Pa 1976), 2005, 30(24): E716-E723.
[9]Kumaresan S, Yoganandan N, Pintar FA, et al. Biomechanical study of pediatric human cervical spine: a finite element approach [J]. J Biomech Eng, 2000, 122(1): 60-71.[10]Mizuno K, Iwata K, Deguchi T, et al. Development of a threeyearold child FE model [J]. Traffic Inj Prev, 2005, 6(4): 361-371.
[11]Meyer F, Bourdet N, Roth R, et al. Three years old child neck FE modelling under automotive accident conditions [C]// Proceedings of the International Research Council on the Biomechanics of Injury Conference International Research Council on Biomechanics of Injury. Maastricht: International Research Council on Biomechanics of Injury, 2007: 277-290.[12]Dong L, Li G, Mao H, et al. Development and validation of a 10yearold child ligamentous cervical spine finite element model [J]. Ann Biomed Eng, 2013, 41(12): 2538-2552.
[13]Kopperdahl DL, Keaveny TM. Yield strain behavior of trabecular bone [J]. Journal of Biomechanics, 1998, 31(7): 601-608.
[14]Keaveny T M, Morgan E F, Niebur G L, et al. Biomechanics of trabecular bone [J]. Annu Rev Biomed Eng, 2001, 3: 307-333.
[15]Gilsanz V, Perez FJ, Campbell PP, et al. Quantitative CT reference values for vertebral trabecular bone density in children and young adults [J]. Radiology, 2009, 250(1): 222-227.
[16]Reilly DT, Burstein AH, Frankel VH. The elastic modulus for bone [J]. J Biomech, 1974, 7(3): 271-275.
17]Panjabi MM, Chen NC, Shin EK, et al. The cortical shell architecture of human cervical vertebral bodies [J]. Spine (Phila Pa 1976), 2001, 26(22): 2478-2484.
[18]Panzer MB, Cronin DS. C4-C5 segment finite element model development, validation, and loadsharing investigation [J]. J Biomech, 2009, 42(4): 480-490.
[19]Irwin A, Mertz HZ. Biomechanical Basis for the CRABI and Hybrid III Child Dummies [C]// Proceedings of the 2nd Symposium on Child Occupant Protection. Orlando: SAE Publication, 1997: 261-272.
[20]Yoganandan N, Pintar F, Kumaresan S, et al. Pediatric and small female neck injury scale factors and tolerance based on human spine biomechanical characteristics [C]// Proceedings of the 2000 International IRCOBI Conference on the Biomechanics of Impact. Montpellier: International Research Council on Biomechanics of Injury, 2000: 345-359.
[21]Wagner DR, Lotz JC. Theoretical model and experimental results for the nonlinear elastic behavior of human annulus fibrosus [J]. J Orthop Res, 2004, 22(4): 901-909.
[22]Holzapfel GA, SchulzeBauer CA, Feigl G, et al. Single lamellar mechanics of the human lumbar anulus fibrosus [J]. Biomech Model Mechanobiol, 2005, 3(3): 125-140.[23]Fujita Y, Duncan NA, Lotz JC. Radial tensile properties of the lumbar annulus fibrosus are site and degeneration dependent [J]. Journal of orthopaedic research, 1997, 15(6): 814-819.
[24]Iatridis JC, Setton LA, Foster RJ, et al. Degeneration affects the anisotropic and nonlinear behaviors of human anulus fibrosus in compression [J]. Journal of Biomechanics, 1998, 31(6): 535-544.
[25]Yamada H,Evans FG. Strength of Biological Materials [M]. Baltimore: Williams & Wilkins, 1970: 80-87.
[26]Yoganandan N, Kumaresan S, Pintar FA. Biomechanics of the cervical spine Part 2. Cervical spine soft tissue responses and biomechanical modeling [J]. Clin Biomech (Bristol, Avon), 2001, 16(1): 1-27.
[27]Chazal J, Tanguy A, Bourges M, et al. Biomechanical properties of spinal ligaments and a histological study of the supraspinal ligament in traction [J]. Journal of Biomechanics, 1985, 18(3): 167-176.
[28]Nightingale RW, Carol Chancey V, Ottaviano D, et al. Flexion and extension structural properties and strengths for male cervical spine segments [J]. J Biomech, 2007, 40(3): 535-542.
[29]Yoganandan N, Pintar FA, Stemper BD, et al. Leveldependent coronal and axial momentrotation corridors of degenerationfree cervical spines in lateral flexion [J]. J Bone Joint Surg Am, 2007, 89(5): 1066-1074.
[30]Yoganandan N, Stemper BD, Pintar FA, et al. Normative segmentspecific axial and coronal angulation corridors of subaxial cervical column in axial rotation [J]. Spine (Phila Pa 1976), 2008, 33(5): 490-496.
[31]DeWit JA, Cronin DS. Cervical spine segment finite element model for traumatic injury prediction [J]. J Mech Behav Biomed Mater, 2012, 10: 138-150.
[32]Kasra M, Parnianpour M, ShiraziAdl A, et al. Effect of strain rate on tensile properties of sheep disc anulus fibrosus [J]. Technol Health Care, 2004, 12(4): 333-342.