超临界二氧化碳流体发泡技术制备组织工程支架及其泡孔形貌控制研究进展

doi:10.3969/j.issn.0258-8021. 2014. 04.011

摘要
图/表
参考文献
相关文章 (1)

全文: PDF (1823 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要组织工程支架作为细胞生长的载体，在组织工程再生组织的研究中具有非常重要的地位。传统方法在三维支架的理论研究与制备技术方面均已趋于成熟，但制备过程仍存在工艺复杂，有机溶剂难以去除，制备条件不利于保持生物分子活性等问题。近年来，超临界二氧化碳流体技术利用优越的传质性与环境友好性，已广泛用于制备各种三维结构的组织工程支架，其中以超临界发泡技术最为经典。三维多孔支架在超临界发泡技术制备过程中，泡孔形貌受材料性质、致孔剂种类及工艺参数等方面的影响。本文就采用该技术制备的多孔支架研究进展及存在的问题进行综述，同时对该技术控制泡孔形貌的发展方向提出展望。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	马腾¹陈爱政¹王士斌¹
	2*

关键词 ：组织工程支架, 超临界二氧化碳流体, 发泡法, 泡孔形貌

Abstract：As a carrier for the cell growth, tissue engineering scaffolds play important roles in the development of tissueengineered tissue. Conventional methods have been widely studied in manufacture of threedimension scaffolds. However, there are still some obstacles, such as the complication in process, removing organic solvents completely and maintaining the bioactivity of biomolecules loaded. Due to its environmentfriendship and high diffusion rate, the supercritical carbon dioxide (scCO₂) technology, particularly the supercritical foaming process, has been widely exploited for producing tissue engineering scaffolds. The pore morphologies of the resulting scaffolds are largely dependent on physical and chemical parameters including the chemical composition, porogen and processing parameters. This article mainly reviews the development of tissue engineering scaffolds and the study of their pore morphologies by supercritical CO₂ foaming technology. Advices regarding existing problems and prospective research are also proposed.

Key words： tissue engineering scaffolds supercritical carbon dioxide foaming pore morphology

基金资助:国家自然科学基金(31170939，51103049)；福建省福建省科技计划项目资助(2013Y2002)

引用本文:

马腾¹陈爱政¹王士斌^1,2*. 超临界二氧化碳流体发泡技术制备组织工程支架及其泡孔形貌控制研究进展[J]. 中国生物医学工程学报, 2014, 33(4): 467-474.
MA Teng¹CHEN Ai Zheng^1WANG Shi Bin^1,2*. Research Progress in Study of Tissue Engineering Scaffolds and their Pore Morphologies by Supercritical CO₂ Foaming Technology. journal1, 2014, 33(4): 467-474.

链接本文:

http://cjbme.csbme.org/CN/10.3969/j.issn.0258-8021. 2014. 04.011 或 http://cjbme.csbme.org/CN/Y2014/V33/I4/467

［1］Jang JH, Shea LD. Controllable delivery of nonviral DNA from porous scaffolds ［J］. J Control Release, 2003, 86(1): 157-168.
［2］Mikos AG, Yuan Bao, Cima LG, et al. Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation ［J］. J Biomed Mater Res, 1993, 27(2): 183-189.
［3］Hutmacher DW. Scaffolds in tissue engineering bone and cartilage ［J］. Biomaterials, 2000, 21(24): 2529-2543.
［4］Nam YS, Park TG. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation ［J］. J Biomed Mater Res, 1999, 47(1): 8-17.［5］Whang K, Thomas CH, Healy KE. A novel method to fabricate bioabsorbable scaffolds ［J］. Polymer, 1995, 36(4): 837-842.
［6］崔新爱, 刘欣, 孔德领,等. 静电纺胶原/丝素复合微纳米纤维的制备及细胞相容性研究［J］. 中国生物医学工程学报, 2012, 31(2): 291-299.
［7］赵晋, 周志华, 李敏. 蛛丝蛋白/聚己内酯/壳聚糖复合纳米纤维支架与内皮细胞的相容性［J］. 中国生物医学工程学报, 2011, 30(5): 750-756.
［8］Mikos AG, Sarakinos G, Leite SM, et al. Laminated threedimensional biodegradable foams for use in tissue engineering ［J］. Biomaterials, 1993, 14(5): 323-330.
［9］Hile DD, Amirpour ML, Akgerman A, et al. Active growth factor delivery from poly(D,Llactidecoglycolide) foams prepared in supercritical CO2 ［J］. J Control Release, 2000, 66(2): 177-185.
［10］Santo VE, Duarte ARC, Popa EG, et al. Enhancement of osteogenic differentiation of human adipose derived stem cells by the controlled release of platelet lysates from hybrid scaffolds produced by supercritical fluid foaming ［J］. J Control Release, 2012, 162(1): 19-27.
［11］Tai Hongyun, Mather ML, Howard D, et al. Control of pore size and structure of tissue engineering scaffolds produced by supercritical fluid processing ［J］. Eur Cell Mater, 2007, 14: 64-77.
［12］Rouholamin D, Smith PJ, Ghassemieh E. Control of morphological properties of porous biodegradable scaffolds processed by supercritical CO2 foaming ［J］. J Mater Sci, 2013, 48(8): 3254-3263.
［13］Teng Xinrong, Ren Jie, Gu Shuying. Preparation and characterization of porous PDLLAHA composite foams by supercritical carbon dioxide technology ［J］. J Biomed Mater Res B, 2007, 81B(1): 185-193.
［14］White LJ, Hutter V, Tai Hongyun, et al. The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering ［J］. Acta Biomater, 2012, 8(1): 61-71.
［15］Bhamidipati M, Scurto AM, Detamore MS. The future of carbon dioxide for polymer processing in tissue engineering ［J］. Tissue Eng Part B Rev, 2013, 19(3): 221-232.
［16］Tsivintzelis I, Pavlidou E, Panayiotou C. Porous scaffolds prepared by phase inversion using supercritical CO2 as antisolvent ［J］. J Supercrit Fluid, 2007, 40(2): 317-322.［17］Deng Aihua, Chen Aizheng, Wang Shibin, et al. Porous nanostructured polyLlactide scaffolds prepared by phase inversion using supercritical CO2 as a nonsolvent in the presence of ammonium bicarbonate particles ［J］. J Supercrit Fluid, 2013, 77: 110-116.
［18］丁珊, 邢禹彬, 李立华,等. SCCO2纤维粘接法制备PLA/TCP/Collagen组织工程支架材料［J］. 材料研究学报, 2007, 21(4): 348-353.
［19］MartiniVvedensky JE, Suh NP, Waldman FA. Microcellular closed cell foams and their method of manufacture ［P］. U.S. Pantent: 4473665, 1984-09-25.
［20］何亚东. 聚合物微发泡材料制备技术应用研究进展［J］. 塑料, 2004, 33(5): 9-15.
［21］Hong IK, Lee S. Microcellular foaming of silicone rubber with supercritical carbon dioxide［J］. Korean J Chem Eng, 2014, 31(1): 166-171.
［22］Ma Zhonglei, Zhang Guangcheng, Yang Quan, et al. Fabrication of microcellular polycarbonate foams with unimodal or bimodal cellsize distributions using supercritical carbon dioxide as a blowing agent ［J］. Journal of Cellular Plastics, 2014, 50(1): 55-79.
［23］Yang Jintao, Huang Lingqi, Zhang Yuefang, et al. Mesoporous Silica Particles Grafted with Polystyrene Brushes as a Nucleation Agent for Polystyrene Supercritical Carbon Dioxide Foaming ［J］. J Appl Polym Sci, 2013, 130(6): 4308-4317.
［24］Ding Jie, Ma Weihua, Song Fujiao, et al. Foaming of polypropylene with supercritical carbon dioxide: An experimental and theoretical study on a new process ［J］. J Appl Polym Sci, 2013, 130(4): 2877-2885.
［25］Mooney DJ, Mazzoni CL, Breuer C, et al. Stabilized polyglycolic acid fibrebased tubes for tissue engineering ［J］. Biomaterials, 1996, 17(2): 115-124.
［26］廖若谷. 超临界二氧化碳发泡过程中聚合物泡孔结构的控制［D］. 上海: 上海交通大学, 2009.
［27］高长云, 周南桥, 彭响方. 微孔发泡过程中聚合物超临界CO2均相体系形成的研究［J］. 工程塑料应用, 2003, 31(10): 32-34.
［28］Park CB, Baldwin DF, Suh NP. Effect of the pressure drop rate on cell ［J］. Polym Eng Sci, 1995, 35(5): 432-440.
［29］卢岩, 信春玲, 李庆春,等. 聚合物超临界流体发泡体系的泡孔生长过程模拟［J］. 塑料, 2009, 38(1): 16-18.
［30］Gualandi C, White LJ, Liu Chen, et al. Scaffold for tissue engineering fabricated by nonisothermal supercritical carbon dioxide foaming of a highly crystalline polyester ［J］. Acta Biomater, 2010, 6(1): 130-136.
［31］Putta S, Nasser SN. Molecularlybased numerical evaluation of free volume in amorphous polymers ［J］. Mat Sci and Eng Astruct, 2001, 317(1): 70-76.［32］Tsioptsias C, Panayiotou C. Foaming of chitin hydrogels processed by supercritical carbon dioxide ［J］. J Supercrit Fluid, 2008, 47(2): 302-308.
［33］李静莉, 罗世凯, 沙艳松,等. 超临界流体微孔发泡塑料的研究进展［J］. 工程塑料应用, 2012, 40(3): 109-113.
［34］Tayton E, Purcell M, Aarvold A, et al. Supercritical CO2 fluidfoaming of polymers to increase porosity: A method to improve the mechanical and biocompatibility characteristics for use as a potential alternative to allografts in impaction bone grafting? ［J］. Acta Biomater, 2012, 8(5): 1918-1927.
［35］Yang Guanghui, Su Juanjuan, Gao Jian, et al. Fabrication of wellcontrolled porous foams of graphene oxide modified poly(propylenecarbonate) using supercritical carbon dioxide and its potential tissue engineering applications ［J］. J Supercrit Fluid, 2013, 73: 1-9.
［36］Xia Zhong, Dehghani F. Fabrication of biomimetic poly(propylene carbonate) scaffolds by using carbon dioxide as a solvent, monomer and foaming agent ［J］. Green Chem, 2012, 14(9): 2523-2533.
［37］Markocic E, Skerget M, Knez Z. Solubility and diffusivity of CO2 in poly(Llactide)hydroxyapatite and poly(DLlactidecoglycolide)hydroxyapatite composite biomaterials ［J］. J Supercrit Fluid, 2011, 55(3): 1046-1051.
［38］Delabarde C, Plummer CJG, Bourban PE, et al. Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applications ［J］. J Mater Sci: Mater Med, 2012, 23(6): 13711385.
［39］Zhang Wenhao, Chen Binyi, Zhao Haibin, et al. Processing and Characterization of Supercritical CO2 Batch Foamed Poly(lactic acid)/Poly(ethylene glycol) Scaffold for Tissue Engineering Application ［J］. J Appl Polym Sci, 2013,
130(5): 3066-3073.
［40］Ji Chengdong, Annabi N, Hosseinkhani M, et al. Fabrication of polyDLlactide/polyethylene glycol scaffolds using the gas foaming technique ［J］. Acta Biomater, 2012, 8(2): 570-578.
［41］Kim SH, Jung Y, Kim SH. A biocompatible tissue scaffold produced by supercritical fluid processing for cartilage tissue engineering ［J］. Tissue Engineering Part C: Methods, 2013, 19(3): 181-188.
［42］Santo VE, Duarte ARC, Gomes ME, et al. Hybrid 3D structure of poly(D,Llactic acid) loaded with chitosan/chondroitin sulfate nanoparticles to be used as carriers for biomacromolecules in tissue engineering ［J］. J Supercrit Fluid, 2010, 54(3): 320-327.
［43］Tai Hongyun, Upton CE, White LJ, et al. Studies on the interactions of CO2 with biodegradable poly(DLlactic acid) and poly(lactic acidcoglycolic acid) copolymers using high pressure ATRIR and high pressure rheology ［J］. Polymer, 2010, 51(6): 1425-1431.
［44］Sheridan MH, Shea LD, Peters MC, et al. Bioabsorbable polymer scaffolds for tissue engineering capable of sustained growth factor delivery ［J］. J Control Release, 2000, 64(1): 91-102.
［45］Harris LD, Kim BS, Mooney DJ. Open pore biodegradable matrices formed with gas foaming ［J］. J Biomed Mater Res, 1998, 42(3): 396-402.
［46］Takagi S, Chow LC. Formation of macropores in calciumphosphate cement implants ［J］. J Mater Sci Mater Med, 2001, 12(2): 135-139.
［47］Collins NJ, Leeke GA, Bridson RH, et al. The influence of silica on pore diameter and distribution in PLA scaffolds produced using supercritical CO2 ［J］. J Mater Sci Mater Med, 2008, 19(4): 1497-1502.
［48］Barralet JE, Grover L, Gaunt T, et al. Preparation of macroporous calcium phosphate cement tissue engineering scaffold ［J］. Biomaterials, 2002, 23(15): 3063-3072.
［49］Collins NJ, Bridson RH, Leeke GA, et al. Particle seeding enhances interconnectivity in polymeric scaffolds foamed using supercritical CO2 ［J］. Acta Biomater, 2010, 6(3): 1055-1060.
［50］Xing Zhe, Wang Mouhua, Du Guohao, et al. Preparation of microcellular polystyrene/polyethylene alloy foams by supercritical CO2 foaming and analysis by Xray microtomography ［J］. J Supercrit Fluid, 2013, 82: 50-55.
［51］Goel SK, Beckman EJ. Generation of microcellular polymeric foams using supercritical carbon dioxide. I: Effect of pressure and temperature on nucleation ［J］. Polym Eng Sci, 1994, 34(14): 1137-1147.
［52］Tsioptsias C, Stefopoulos A, Kokkinomalis I, et al. Development of micro and nanoporous composite materials by processing cellulose with ionic liquids and supercritical CO2 ［J］. Green Chem, 2008, 10(9): 965-971.
［53］Gutiérrez C, Rodríguez JF, Gracia I, et al. Development of a strategy for the foaming of polystyrene dissolutions in scCO2 ［J］. J Supercrit Fluid, 2013, 76: 126-134.
［54］刘倩倩, 唐川, 杜哲,等. 超临界CO2发泡法制备PLGA多孔组织工程支架［J］. 高分子学报, 2013, (2): 174-182.
［55］许志美, 姜修磊, 刘涛,等. 应用超临界CO2制备微孔聚丙烯的微孔形貌［J］. 功能高分子学报, 2007, 19(1): 21-26.
［56］Barry JJA, Silva MMCG, Popov VK, et al. Supercritical carbon dioxide: putting the fizz into biomaterials ［J］. Philos Trans A Math Phys Eng Sci, 2006, 364(1838): 249-261.［57］Barry JJA, Silva MMCG, Cartmell SH, et al. Porous methacrylate tissue engineering scaffolds: using carbon dioxide to control porosity and interconnectivity ［J］. J Mater Sci, 2006, 41(13): 4197-4204.
［58］Cabezas LI, Fernández V, Mazarro R, et al. Production of biodegradable porous scaffolds impregnated with indomethacin in supercritical CO2 ［J］. J Supercrit Fluid, 2012, 63: 155-160.
［59］Cabezas LI, Gracia I, García MT, et al. Production of biodegradable porous scaffolds impregnated with 5-fluorouracil in supercritical CO2 ［J］. J Supercrit Fluid, 2013, 80: 1-8.
［60］Singh M, Sandhu B, Scurto A, et al. Microspherebased scaffolds for cartilage tissue engineering: using subcritical CO2 as a sintering agent ［J］. Acta Biomater, 210, 6(1): 137-143.
［61］Ginty PJ, Howard D, Upton CE, et al. A supercritical CO2 injection system for the production of polymer/mammalian cell composites ［J］. J Supercrit Fluid, 2008, 43(3): 535-541.