网站首页            期刊简介             编委会             投稿指南             期刊订阅             下载中心             在线留言            联系我们             English
  2025年1月11日 星期六  
文章快速检索
中国生物医学工程学报
  论文 本期目录 | 过刊浏览 | 高级检索 |
基于超声体模的颈动脉血流介导血管扩张斑块高度测量方法比较
1 华中科技大学生命科学与技术学院生物医学工程系,图像信息处理与智能控制教育部重点实验室, 武汉 430074
2 中山大学肿瘤防治中心, 华南肿瘤学国家重点实验室, 广州 510060
3 华中科技大学图像识别与人工智能研究所, 多谱信息处理技术国防科技重点实验室, 武汉 430074
4 郑州大学第五附属医院CT室, 郑州 450052
5 华中科技大学同济医学院附属协和医院泌尿外科, 武汉 430074)
6 上海交通大学MedX学院生物医学仪器研究所, 上海 200030)
7 湖北科技学院生物医学工程学院, 咸宁 437100
Comparison and Measurement of Plaque Heights for Carotid FlowMediated Dilation Based on Ultrasound Phantom
1 Department of Biomedicine Engineering, College of Life Science and Technology,“Image Processing and Intelligence Control” Key Laboratory of Education Ministry of China, Huazhong University of Science and Technology, Wuhan 430074, China
2 Sun YatSen University Cancer Center, State Key Laboratory of Oncology in Southern China, Guangzhou 510060, China
3 Institute for Pattern Recognition and Artificial Intelligence (IPRAI), State Key Laboratory for Multispectral Information Processing Technologies, Huazhong University of Science and Technology, Wuhan 430074, China
4 The Fifth Affiliated Hospital of Zhengzhou University CTroom, Zhengzhou 450052, China
5 Department of Urology, Union Hospital, Tongji Medicinal College, Huazhong University of Science and Technology, Wuhan 430074, China
全文: PDF (2324 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 通过设计实验对超声体模的血管扩张功能(FMD)斑块高度进行了测量,对各种测量方法做出了定性与定量分析和比较,从而确定最佳的评估方法及软件,以用于颈动脉粥样硬化临床早期诊断和治疗。以颈动脉超声体模的实际尺寸作为金标准,对FMD斑块高度进行了测量,利用超声诊断仪专用软件和自行开发的分割软件,分别使用3种不同的测量方法:横向直接测量、横向间接测量和纵向直接测量,获取斑块的高度,并进行了比较和分析。结果表明,在横向间接测量方法中,超声诊断仪专用软件比自行开发的分割软件更为准确;而在横向直接测量和纵向直接测量中,自行开发的分割软件比超声诊断仪专用软件更为准确。自行开发的分割软件与超声诊断仪专用软件的测量结果在统计学上存在显著性差异(P<0.05),但两者相差的绝对值并不大(对应0.30、0.45、0.60 cm等 3种斑块高度,小于0.02 cm)。总体来说,超声诊断仪专用软件和自行开发的分割软件测量结果都接近于金标准,但自行开发的分割软件的精确性优于超声诊断仪专用软件
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
蔡文娟1 杨鑫2
3徐红卫4 <
关键词 动脉粥样硬化血管扩张功能 超声体模 软件比较 评估    
Abstract:The aim of this study was to find the most efficient measurement method used for the early diagnosis and treatment of carotid atherosclerosis in clinic. Measurement experiments based on the ultrasound phantom were designed to obtain the plaque heights for flowmediated dilation (FMD). The quantitative analysis and comparison were made among these methods. Actual heights of simulated plaques in carotid ultrasoundphantom were used as the golden standard of the measurement. Measurement experiments for the plaques heights were designed for FMD evaluation. Plaque height measurements were implemented on two individual software of ultrasonographybased specialized software (USS) and our developed segmentation software (OSS), with three different measurement methods: transverse direct measurement (or transverse plaques height measurement, TPHM); transverse indirect measurement (or transverse plaques area measurement, TPAM); longitudinal direct measurement (or longitudinal plaques height measurement, LPHM). The measurement methods were evaluated according to the plaques heights. The measurement results between USS and OSS were statistically and significantly different (P<0.05), but the means of their difference are less than 0.02 cm with three different plaque heights. For TPAM, USS has a better performance on accuracy than OSS while for TPHM and LPHM, the conclusions were opposite. In conclusion, results obtained from the two measurements are both close to the golden standard, while the accuracy of OSS is higher than the USS.
Key wordscarotid atherosclerosis    flowmediated dilation    ultrasound phantom    software comparison    evaluation
    
基金资助:国家自然科学基金国际合作项目(30911120497);国家科技支撑计划项目(2012BA113B02);湖北公益性科技研究项目(2012DCA06001)
引用本文:   
蔡文娟1    杨鑫2,3徐红卫4    <. 基于超声体模的颈动脉血流介导血管扩张斑块高度测量方法比较[J]. 中国生物医学工程学报, 2014, 33(4): 438-446.
CAI Wen Juan1YANG Xin2,3 XU Hong Wei4    LIU Yang4      LIANG Hua Geng5     HE Chu . Comparison and Measurement of Plaque Heights for Carotid FlowMediated Dilation Based on Ultrasound Phantom. journal1, 2014, 33(4): 438-446.
链接本文:  
http://cjbme.csbme.org/CN/ 10.3969/j.issn.0258-8021. 2014. 04.08     或     http://cjbme.csbme.org/CN/Y2014/V33/I4/438
版权所有 © 2015 《中国生物医学工程学报》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发