Finite Element Analysis of Posterior Atlantoaxial Fixationfor Type II Odontoid Process Fracture with High-Riding Vertebral Artery
Dong Ziqiang1, Zhao Gaiping1*, Bi Houhai1, Zhao Qinghua2, Wang Hongjie2
1(School of Medical Instrument and Food Engineering University of Shanghai for Science and Technology,Shanghai 200093,China) 2(Department of Orthopaedics,Shanghai First People′s Hospital,Shanghai 200080,China)
Abstract：To investigate the biomechanical characteristics on the treatment of type II odontoid process fracture with axial unilateral high-riding vertebral artery by two kinds of the combined posterior atlantoaxial fixation,the stability of the upper cervical vertebra and the stress distribution of the internal fixation implants translaminar screw,pedicle screws and C2 pars screw were analyzed. Based on the CT image data of type II odontoid process fracture of human cervical spine,combined with the finite element pre-processing software,according to the clinical operation plan,the posterior atlantoaxial fixation models of two combinations of upper cervical vertebra were established:1) unilateral axial translaminar screw + atlantoaxial pedicle screws fixation (C1PS-C2TL+PS);2) unilateral C2 pars screw + atlantoaxial pedicle screws fixation (C1PS-C2pars+PS). The range of motion and the stress distribution of internal fixation implants of two fixed models were analyzed under flexion and extension,lateral bending and rotation. In the two kinds of posterior atlantoaxial fixation on the treatment of type II odontoid process fracture with unilateral high-riding vertebral artery,the range of motion of the atlantoaxial joint of C1PS-C2TL+PS model decreased by 92.71%,91.28%,95.89% respectively under flexion and extension,lateral bending and rotation,and C1PS-C2pars+PS model decreased by 89.50%,94.77% and 92.72% respectively,all of which indicated that the stiffness of the fixed segments of vertebral body was significantly improved. In addition,the stress of C1PS-C2pars+PS model at the root of the axial screw and the lower part of the connecting rod was significantly concentrated under the flexion and extension conditions,with the maximum stress values of 179.9 and 167.6 MPa respectively,which was 55.1 and 52.2 MPa higher than those of C1PS- C2TL+PS model. The maximum stress values of C2pars screw under different conditions changed greatly,the maximum value was 123.7 MPa under flexion condition,which was 21.4 MPa higher than the maximum stress value of C2TL. In conclusion,the two fixed operations of C1PS-C2TL+PS and C1PS-C2pars+PS could effectively improve the stiffness of atlantoaxial for type II odontoid process fracture with high-riding vertebral artery,the former has better stability in flexion and extension and rotation,and the C1PS-C1TL+PS internal fixation is more reasonable in structure and stress distribution. These results provided theoretical basis for the study of internal fixation for type II odontoid process fracture with high-riding vertebral artery.
董自强, 赵改平, 毕厚海, 赵庆华, 王宏杰. 伴椎动脉高跨的Ⅱ型齿状突骨折后路寰枢椎固定术的有限元分析[J]. 中国生物医学工程学报, 2020, 39(4): 459-465.
Dong Ziqiang, Zhao Gaiping, Bi Houhai, Zhao Qinghua, Wang Hongjie. Finite Element Analysis of Posterior Atlantoaxial Fixationfor Type II Odontoid Process Fracture with High-Riding Vertebral Artery. Chinese Journal of Biomedical Engineering, 2020, 39(4): 459-465.
[1] Neo M,Matsushita M,Iwashita Y,et al.Atlantoaxial transarticular screw fixation for a high-riding vertebral artery[J].Spine,2003,28:666-670. [2] Anderson LD,D′Alonzo RT.Fractures of the odontoid process of the axis[J].Journal of Bone &Joint Surgery,American Volume,2004,56(8):1663-1674. [3] Zheng Yonghong,Hao Dingjun,Wang Biao,et al.Clinical outcome of posterior C1-C2 pedicle screw fixation and fusion for atlantoaxial instability:A retrospective study of 86 patients[J].Journal of Clinical Neuroscience,2016,32:47-50. [4] Yeom JS,Buchowski JM,Kim HJ,et al.Risk of vertebral artery injury:comparison between C1－C2 transarticular and C2 pedicle screws[J].Spine J,2013,13(7):775-785. [5] Du Shiyao,Ni Bin,Lu Xuhua,et al.Application of unilateral C2 translaminar screw in the treatment for atlantoaxial instability as an alternative or salvage of pedicle screw fixation[J].World Neurosurgery,2017,97:86-92. [6] Miyakoshi N,Hongo M,Kobayashi T,et al.Comparison between bilateral C2 pedicle screwing and unilateral C2 pedicle screwing,combined with contralateral C2 laminar screwing,for atlantoaxial posterior fixation[J].Asian Spine Journal,2014,8(6):777-785. [7] Chun DH,Yoon DH,Kim KN,et al.Biomechanical comparison of four different atlantoaxial posterior fixation constructs in adults[J].Spine,2018,43(15):E891-E897. [8] Su BW,Shimer AL,Chinthakunta S,et al.Comparison of fatigue strength of C2 pedicle screws,C2 pars screws,and a hybrid construct in C1-C2 fixation[J].Spine,2014,39(1):E12-E19. [9] Panjabi MM,Oxland TR,Parks EH.Quantitative anatomy of cervical spine ligaments.Part I.Upper cervical spine[J].J Spinal Disord,1991,4(3):270-276. [10] Yoganandan N,Kumaresan S,Pintar FA.Biomechanics of the cervical spine Part 2.Cervical spine soft tissue responses and biomechanical modeling[J].Clinical Biomechanics,2001,16(1):1-27. [11] Lee SH,Im YJ,Kim KT,et al.Comparison of cervical spine biomechanics after fixed- and mobile-core artificial disc replacement:a finite element analysis[J].Spine,2011,36(9):700-708. [12] Pitzen TR,Matthis D,Barbier DD,et al.Initial stability of cervical spine fixation:predictive value of a finite element model.Technical note[J].Journal of Neurosurgery,2002,97(Suppl 1):128-134. [13] Zhang QH,Teo EC,Ng HW,et al.Finite element analysis of moment-rotation relationships for human cervical spine.Journal of Biomechanics,2006,39(1):189-193. [14] 王威,蔡贤华,王志华,等.上颈椎三维六面体网格有限元模型的建立及有效性验证[J].中华生物医学工程杂志,2014,20(4):282-288. [15] Melcher RP,Puttlitz CM,Kleinstueck FS,et al.Biomechanical testing of posterior atlantoaxial fixation techniques[J].Spine,2002,27(22):2435-2440. [16] Robertson PA,Tsitsopoulos PP,Voronov LI,et al.Biomechanical investigation of a novel integrated device for intra-articular stabilization of the C1-C2 (atlantoaxial) joint[J].The Spine Journal,2012,12(2):136-142. [17] Sim HB,Lee JW,Park JT,et al.Biomechanical evaluations of various C1-C2 posterior fixation techniques[J].Spine,2011,36(6):E401-E407. [18] Xu Tianming,Guo Qunfeng,Liu Qi et al.Biomechanical evaluation of a novel integrated C1 laminar hook combined with C1-C2 transarticular screws for atlantoaxial fusion:An in vitro human cadaveric study[J].World Neurosurgery,2016,92:133-139. [19] Kuroki H,Rengachary SS,Goel VK,et al.Biomechanical comparison of two stabilization techniques of the atlantoaxial joints:Transarticular screw fixation versus screw and rod fixation[J].Neurosurgery,2005,56 (Suppl 1):151-159. [20] Liu Shichang,Song Zongrang,Li Min,et al.Biomechanical evaluation of C1 lateral mass and C2 translaminar bicortical screws in atlantoaxial fixation:an in vitro human cadaveric study[J].Spine Journal,2018,18(4):674-681. [21] Gorek J,Acaroglu E,Berven S,et al.Constructs incorporating intralaminar C2 screws provide rigid stability for atlantoaxial fixation[J].Spine,2005,30(13):1513-1518. [22] Leonard JR,Wright NM.Pediatric atlantoaxial fixation with bilateral,crossing C-2 translaminar screws[J].Journal of Neurosurgery:Pediatrics,2006,104(1):59-63. [23] Ma Xiangyang,Yin Qingshui,Wu Zenghui,et al.C2 Anatomy and dimensions relative to translaminar screw placement in an Asian populmion.Spine,2010,35(6):704-708. [24] Dobran M,Nasi D,Esposito DP,et al.Posterior fixation with C1 lateral mass screws and C2 pars screws for Type II odontoid fracture in the elderly:Long-term follow-up[J].World Neurosurgery,2016,96:152-158. [25] Chen Chensheng,Chen Wenjer,Cheng Chengkung,et al.Failure analysis of broken pedicle screws on spinal instrumentation[J].Med Eng Phys,2005,27(6):487-496. [26] Lehman RA,Dmitriev AE,Helgeson MD,et al.Salvage of C2 pedicle and pars screws using the intralaminar technique[J].Spine,2008,33(9):960-965.
