钛基牙种植体早期植入稳定性

doi:10.3969/j.issn.0258-8021.2023.01.012

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1990 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Titanium (Ti) and its alloys, as implant materials emerging at the end of the 20^th century, have the advantages of high strength, low weight, and good biocompatibility. With the rapid development of implant technology and the increasing clinical demand,Ti implants have been quickly and widely used in orthopedic treatment, especially for the restoration of tooth defects. However, due to various factors such as slow osseointegration rate, bacterial infection and the accumulation of excessive active oxygen, the early implantation stability of the implant is poor, resulting in a short service life after implantation in the body, which has become an important problem limiting the success rate of dental implant implantation. Therefore, the early clinical implantation stability of implants needs to be further improved. Starting from three aspects of material factors, biological factors and other factors that affect the stability of early clinical implants, this article reviews the research status and development trends ofTi-based dental implants to improve the stability of early clinical implants and provides a reference for the improvement of the success rate of dental implants.

Key words： titanium dental implants early implantation stability

Received: 16 September 2021

PACS:

R318

Corresponding Authors: ^*E-mail:huangjw2067@163.com

About author:: ^#Member, Chinese Society of Biomedical Engineering

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liao Ziming
	Li Jingxuan
	Du Jingjing
	Wei Yan
	Chen Weiyi
	Huang Di

Cite this article:

Liao Ziming,Li Jingxuan,Du Jingjing, et al. Early Implantation Stability of Titanium Abutment Dental Implants[J]. Chinese Journal of Biomedical Engineering, 2023, 42(1): 110-118.

URL:

http://cjbme.csbme.org/EN/10.3969/j.issn.0258-8021.2023.01.012 OR http://cjbme.csbme.org/EN/Y2023/V42/I1/110

[1] Wang Guocheng, Sergio Moya, Lu Zufu, et al. Enhancing orthopedic implant bioactivity: refining the nanotopography[J].Nanomedicine, 2015,10(8):1327-1341.
[2] Wu Shuyi, Xu Jianmeng, Zou Leiyan, et al. Long-lasting renewable antibacterial porous polymeric coatings enable titanium biomaterials to prevent and treat peri-implant infection [J]. Nat Commun, 2021,12(1):3303.
[3] Chen Hongjie, Wang Chunli, Yang Xiao, et al. Construction of surface HA/TiO₂ coating on porous titanium scaffolds and its preliminary biological evaluation [J]. Mater Sci Eng C Mater Biol Appl, 2017,70(2):1047-1056.
[4] 尹伟, 王晨辰, 刘向辉.不同因素对牙种植体稳定性的影响[J].安徽医学, 2016,37(2):249-251.
[5] Wang Xiaojian, Xu Shanqing, Zhou Shiwei, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review [J]. Biomaterials, 2016,83:127-141.
[6] Liu Ting, Chen Yu, Apicella A, et al. Effect of porous microstructures on the biomechanical characteristics of a root analogue implant: An animal study and a finite element analysis [J]. ACS Biomater Sci Eng, 2020,6(11):6356-6367.
[7] Brodie EG, Robinson KJ, Sigston E, et al. Osteogenic potential of additively manufactured TiTa alloys [J]. ACS Applied Bio Materials, 2021,4(1):1003-1014.
[8] Reggente M, Masson P, Dollinger C, et al. Novel alkali activation of titanium substrates to grow thick and covalently bound PMMA Layers [J]. ACS Appl Mater Interfaces, 2018,10(6):5967-5977.
[9] Goncu Y, Gecgin M, Bakan F, et al. Electrophoretic deposition of hydroxyapatite-hexagonal boron nitride composite coatings on Ti substrate [J]. Mater Sci Eng C Mater Biol Appl, 2017,79:343-353.
[10] Lai YL, Lai SB, Yen SK. Paclitaxel/hydroxyapatite composite coatings on titanium alloy for biomedical applications [J]. Mater Sci Eng C Mater Biol Appl, 2017,79:622-628.
[11] Fu Xi, Zhou Xingyu, Liu Pin, et al. The optimized preparation of HA/L-TiO2/D-TiO2 composite coating on porous titanium and its effect on the behavior osteoblasts [J]. Regen Biomater, 2020,7(5):505-514.
[12] Sobolev A, Valkov A, Kossenko A, et al. Bioactive coating on Ti alloy with high osseointegration and antibacterial Ag nanoparticles [J]. ACS Appl Mater Interfaces, 2019,11(43):39534-39544.
[13] Huang Di, Lin Qiaoxia, Zhou Yujie, et al. Ag nanoparticles incorporated tannic acid/nanoapatite composite coating on Ti implant surfaces for enhancement of antibacterial and antioxidant properties [J]. Surface and Coatings Technology, 2020,399:126169.
[14] Raphel J, Holodniy M, Goodman SB, et al. Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants [J]. Biomaterials, 2016,84:301-314.
[15] Li Xue, Qi Manlin, Sun Xiaolin, et al. Surface treatments on titanium implants via nanostructured ceria for antibacterial and anti-inflammatory capabilities [J]. Acta Biomater, 2019,94:627-643.
[16] Nimbalkar S, Dhatrak P, Gherde C, et al. A review article on factors. affecting bone loss in dental implants [J]. Materials Today: Proceedings, 2021,43:970-976.
[17] Robertson SF, Bandyopadhyay A, Bose S. Titania nanotube interface to increase adhesion strength of hydroxyapatite sol-gel coatings on Ti-6Al-4V for orthopedic applications [J]. Surface and Coatings Technology, 2019,372:140-147.
[18] Bai Long, Liu Yanlian, Du Zhibin, et al. Differential effect of hydroxyapatite nano-particle versus nano-rod decorated titanium micro-surface on osseointegration [J]. Acta Biomater, 2018,76:344-358.
[19] Guillem-Marti J, Cinca N, Punset M, et al. Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications [J]. Colloids Surf B Biointerfaces, 2019,180:245-253.
[20] 林巧霞,殷萌,魏延,等.钛及钛合金表面羟基磷灰石涂层结合强度及稳定性[J].化学进展,2020,32(4):406-416.
[21] Park JW, Kurashima K, Tustusmi Y, et al. Bone healing of commercial oral implants with RGD immobilization through electrodeposited poly(ethylene glycol) in rabbit cancellous bone [J]. Acta Biomater, 2011,7(8):3222-3229.
[22] Jiang Nan, Guo Zhijun, Sun Dan, et al. Promoting osseointegration of Ti implants through micro/nanoscaled hierarchical Ti phosphate/Ti oxide hybrid coating [J]. ACS Nano, 2018,12(8):7883-7891.
[23] Geuli O, Metoki N, Eliaz N, et al. Electrochemically driven hydroxyapatite nanoparticles coating of medical implants [J]. Advanced Functional Materials, 2016,26(44):8003-8010.
[24] Sirin HT, Vargel I, Kutsal T, et al. Ti implants with nanostructured and HA-coated surfaces for improved osseointegration [J]. Artif Cells Nanomed Biotechnol, 2016,44(3):1023-1030.
[25] Karimi E, Khalil-Allafi J, Khalili V. Electrophoretic deposition of double-layer HA/Al composite coating on NiTi [J]. Mater Sci Eng C Mater Biol Appl, 2016,58:882-890.
[26] Otsuka Y, Kawaguchi H, Mutoh Y. Cyclic delamination behavior of plasma-sprayed hydroxyapatite coating on Ti-6Al-4V substrates in simulated body fluid [J]. Mater Sci Eng C Mater Biol Appl, 2016,67:533-541.
[27] Maleki-Ghaleh H, Khalil-Allafi J, Horandghadim N, et al. Structural characterization, mechanical, and electrochemical studies of hydroxyapatite-titanium composite coating fabricated using electrophoretic deposition and reaction bonding process [J]. J Biomed Mater Res B Appl Biomater, 2020,108(5):2119-2130.
[28] Fazel M, Salimijazi HR, Shamanian M, et al. Osteogenic and antibacterial surfaces on additively manufactured porous Ti-6Al-4V implants: Combining silver nanoparticles with hydrothermally synthesized HA nanocrystals [J]. Mater Sci Eng C Mater Biol Appl, 2021,120:111745.
[29] Fathyunes L, Khalil-Allafi J, Sheykholeslami SOR, et al. Biocompatibility assessment of graphene oxide-hydroxyapatite coating applied on TiO2 nanotubes by ultrasound-assisted pulse electrodeposition [J]. Mater Sci Eng C Mater Biol Appl, 2018,87:10-21.
[30] Lim HP, Park SW, Yun KD, et al. Hydroxyapatite coating on TiO(2) nanotube by sol-gel method for implant applications [J]. J Nanosci Nanotechnol, 2018,18(2):1403-1405.
[31] Bi Qing, Song Xian, Chen Yujia, et al. Zn-HA/Bi-HA biphasic coatings on Titanium: Fabrication, characterization, antibacterial and biological activity [J]. Colloids Surf B Biointerfaces, 2020,189:110813.
[32] Priyadarshini B, Vijayalakshmi U. In vitro bioactivity, biocompatibility and corrosion resistance of multi-ionic (Ce/Si) co-doped hydroxyapatite porous coating on Ti-6Al-4 V for bone regeneration applications [J]. Mater Sci Eng C Mater Biol Appl, 2021,119:111620.
[33] Xu Jiayun, Aoki H, Kasugai S, et al. Enhancement of mineralization on porous titanium surface by filling with nano-hydroxyapatite particles fabricated with a vacuum spray method [J]. Mater Sci Eng C Mater Biol Appl, 2020,111:110772.
[34] Sarkar N, Bose S. Controlled delivery of curcumin and vitamin K2 from hydroxyapatite-coated titanium implant for enhanced in vitro chemoprevention, osteogenesis, and in vivo osseointegration [J]. ACS Appl Mater Interfaces, 2020,12(12):13644-13656.
[35] Lu RJ, Wang X, He HX, et al. Tantalum-incorporated hydroxyapatite coating on titanium implants: its mechanical and in vitro osteogenic properties [J]. J Mater Sci Mater Med, 2019,30(10):111.
[36] Prabakaran S, Rajan M, Lv C, et al. Lanthanides-substituted hydroxyapatite/aloe vera composite coated titanium plate for bone tissue regeneration [J]. Int J Nanomedicine, 2020,15:8261-8279.
[37] Abdel-Salam M, El-Hadad S, Khalifa W. Effects of microstructure and alloy composition on hydroxyapatite precipitation on alkaline treated alpha/beta titanium alloys [J]. Mater Sci Eng C Mater Biol Appl, 2019,104:109974.
[38] Rikhari B, Pugal Mani S, Rajendran N. Electrochemical behavior of polypyrrole/chitosan composite coating on Ti metal for biomedical applications [J]. Carbohydr Polym, 2018,189:126-137.
[39] Miculescu F, Maidaniuc A, Voicu SI, et al. Progress in hydroxyapatite-Starch based sustainable biomaterials for biomedical bone substitution applications [J]. ACS Sustainable Chemistry & Engineering, 2017,5(10):8491-8512.
[40] Harun WSW, Asri RIM, Alias J, et al. A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials [J]. Ceramics International, 2018,44(2):1250-1268.
[41] Goodman SB, Yao Z, Keeney M, et al. The future of biologic coatings for orthopaedic implants [J]. Biomaterials, 2013,34(13):3174-3183.
[42] Oldani C, Dominguez A. Titanium as a biomaterial for implants [B]. Recent Advances in Arthroplasty, 2012.
[43] Civantos A, Martinez-Campos E, Ramos V, et al. Titanium coatings and surface modifications: Toward clinically useful bioactive implants [J]. ACS Biomater Sci Eng, 2017,3(7):1245-1261.
[44] Shimabukuro M, Tsutsumi Y, Yamada R, et al. Investigation of realizing both antibacterial property and osteogenic cell compatibility on titanium surface by simple electrochemical treatment [J]. ACS Biomater Sci Eng, 2019,5(11):5623-5630.
[45] Cochis A, Azzimonti B, Chiesa R, et al. Metallurgical gallium additions to titanium alloys demonstrate a strong time-Increasing antibacterial activity without any cellular toxicity [J]. ACS Biomater Sci Eng, 2019,5(6):2815-2820.
[46] Thukkaram M, Coryn R, Asadian M, et al. Fabrication of microporous coatings on titanium implants with improved mechanical, antibacterial, and cell-interactive properties [J]. ACS Appl Mater Interfaces, 2020,12(27):30155-30169.
[47] Yu Sen, Guo Dagang, Han Jianye, et al. Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating [J]. ACS Appl Mater Interfaces, 2020,12(40):44433-44446.
[48] Tande AJ, Gomez-Urena EO, Berbari EF, et al. Management of prosthetic joint infection [J]. Infect Dis Clin North Am, 2017,31(2):237-252.
[49] Ferreira SD, Martins CC, Amaral SA, et al. Periodontitis as a risk factor for peri-implantitis: Systematic review and meta-analysis of observational studies [J]. J Dent, 2018,79:1-10.
[50] Chen Zehao, Wang Zhaodan, Qiu Wei, et al. Overview of antibacterial strategies of dental implant materials for the prevention of peri-implantitis [J]. Bioconjug Chem, 2021,32(4):627-638.
[51] Jiang Nan, Guo Zhijun, Sun Dan, et al. Exploring the mechanism behind improved osteointegration of phosphorylated titanium implants with hierarchically structured topography [J]. Colloids Surf B Biointerfaces, 2019,184:110520.
[52] Bollen CM.L., Lambrechts P, Quirynen M. Comparison of surface. roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature [J]. Dent Mater, Jul, 1997,13:258-269.
[53] Verma SK, Jha E, Panda PK, et al. Mechanistic insight into size-dependent enhanced cytotoxicity of industrial antibacterial titanium oxide nanoparticles on colon cells because of reactive oxygen species quenching and neutral lipid alteration [J]. ACS Omega, 2018,3(1):1244-1262.
[54] Nishida M, Nakaji-Hirabayashi T, Kitano H, et al. Titanium alloy modified with anti-biofouling zwitterionic polymer to facilitate formation of bio-mineral layer [J]. Colloids Surf B Biointerfaces, 2017,152:302-310.
[55] Skovdal SM, Jorgensen NP, Petersen E, et al. Ultra-dense polymer brush coating reduces Staphylococcus epidermidis biofilms on medical implants and improves antibiotic treatment outcome [J]. Acta Biomater, 2018,76:46-55.
[56] Boix-Lemonche G, Guillem-Marti J, D′Este F, et al. Covalent grafting of titanium with a cathelicidin peptide produces an osteoblast compatible surface with antistaphylococcal activity [J]. Colloids Surf B Biointerfaces, 2020,185:110586.
[57] Wisdom EC, Zhou Y, Chen C, et al. Mitigation of peri-implantitis by rational design of bifunctional peptides with antimicrobial properties [J]. ACS Biomater Sci Eng, 2020,6(5):2682-2695.
[58] Vu AA, Robertson SF, Ke D, et al. Mechanical and biological properties of ZnO, SiO2, and Ag2O doped plasma sprayed hydroxyapatite coating for orthopaedic and dental applications [J]. Acta Biomater, 2019,92:325-335.
[59] Xia Chao, Cai Dingsen, Tan Ji, et al. Synergistic effects of N/Cu dual ions implantation on stimulating antibacterial ability and angiogenic activity of titanium [J]. ACS Biomater Sci Eng, 2018,4(9):3185-3193.
[60] Wang Guomin, Jin Weihong, Qasim AM, et al. Antibacterial effects of titanium embedded with silver nanoparticles based on electron-transfer-induced reactive oxygen species [J]. Biomaterials, 2017,124:25-34.
[61] Wang Tingting, Liu Xiangmei, Zhu Yizhou, et al. Metal ion coordination polymer-capped pH-triggered drug Release system on titania nanotubes for enhancing self-antibacterial capability of Ti implants [J]. ACS Biomater Sci Eng, 2017,3(5):816-825.
[62] Chen Weizhen, Shen Xinkun, Hu Yan, et al. Surface functionalization of titanium implants with chitosan-catechol conjugate for suppression of ROS-induced cells damage and improvement of osteogenesis [J]. Biomaterials, 2017,114:82-96.
[63] Spriano S, Yamaguchi S, Baino F, et al. A critical review of multifunctional titanium surfaces: New frontiers for improving osseointegration and host response, avoiding bacteria contamination [J]. Acta Biomater, 2018,79:1-22.
[64] Lin Qiaoxia, Zhou Yujie, Yin Meng, et al. Hydroxyapatite/tannic acid composite coating formation based on Ti modified by TiO2 nanotubes [J]. Colloids Surf B Biointerfaces, 2020,196:111304.
[65] Qiu Jiajun, Geng Hao, Wang Donghui, et al. Layer-number dependent antibacterial and osteogenic behaviors of graphene oxide electrophoretic deposited on titanium [J]. ACS Appl Mater Interfaces, 2017,9(14):12253-12263.
[66] Lee YH, Bhattarai G, Park IS, et al. Bone regeneration around N-acetyl cysteine-loaded nanotube titanium dental implant in rat mandible [J]. Biomaterials, 2013,34(38):10199-10208.
[67] Wu Yuan, Zhang Run, Tran HDN, et al. Chitosan nanococktails containing both ceria and superparamagnetic iron oxide nanoparticles for reactive oxygen species-related theranostics [J]. ACS Applied Nano Materials, 2021,4(4):3604-3618.
[68] Forooshani PK, Meng H, Lee BP. Catechol redox reaction: reactive oxygen species generation, regulation, and biomedical applications [J]. Advances in Bioinspired and Biomedical Materials, 2017,1:179-196.
[69] Song Jialin, Liu Huan, Lei Miao, et al. Redox-Channeling polydopamine-Ferrocene (PDA-Fc) coating to confer context-dependent and photothermal antimicrobial activities [J]. ACS Appl Mater Interfaces, 2020,12(7):8915-8928.
[70] Hu Xiaofan, Wang Lin, Lu Yizhao, et al. Adiponectin improves the osteointegration of titanium implant under diabetic conditions by reversing mitochondrial dysfunction via the AMPK pathway in vivo and in vitro [J]. Acta Biomater, 2017,61:233-248.
[71] Li Xiang, Ma Xiangyu, Feng Yafei, et al. Osseointegration of chitosan coated porous titanium alloy implant by reactive oxygen species-mediated activation of the PI3K/AKT pathway under diabetic conditions [J]. Biomaterials, 2015,36:44-54.
[72] Mora-Raimundo P, Lozano D, Manzano M, et al. Nanoparticles to knockdown osteoporosis-Related gene and promote osteogenic marker expression for osteoporosis treatment [J]. ACS Nano, 2019,13(5):5451-5464.
[73] Zhao Huan, Huang Yingkang, Zhang Wen, et al. Mussel-Inspired peptide coatings on titanium implant to improve osseointegration in osteoporotic condition [J]. ACS Biomater Sci Eng, 2018,4(7):2505-2515.
[74] Suresh G, Ravi Kiran A, Samata Y, et al. Analysis of blood and salivary urea levels in patients undergoing haemodialysis and kidney transplant [J]. J Clin Diagn Res, 2014,8(7):ZC18-20.
[75] Besinis A, Peralta TD, Tredwin CJ, et al. Review of nanomaterials in dentistry: interactions with oral microenvironment, clinical applications, hazards, and benefits[J]. ACS Nano, 2015,9(3):2255-2289.