Abstract：This study is aimed to investigate the effects of different outlet boundary conditions and vessel wall thickness on time-averaged wall shear stress (TAWSS) and von Mises stress (VMS) in the coronary artery fluid structure interaction (FSI) analysis based on patient-specific computed tomography angiography(CTA)images. Firstly, 3D geometry of right coronary artery (RCA) lumen was reconstructed from CTA images. Then, lumen surface was expanded outward by 0.5 mm to establish uniform thickness vessel model. Finally, non-uniform thickness vessel was built by manually removing plaques. Zero and impedance boundary conditions were applied to the computational domains during FSI analysis. Distribution of TAWSS and VMS in a cardiac cycle from end diastolic phase were obtained and analyzed. TAWSS at stenosed sites were both significantly higher than other segments, and there was no significant difference with two outlet boundary conditions. Peak VMS appeared at 0.42 s (maximum pressure) with zero condition, while it appeared at 0.64 s (maximum flow velocity) with impedance condition and was 20 times higher. With impedance outlet boundary condition, the TAWSS in stenosed sites were both significantly higher than other segments, but had a similar distribution without statistical difference in different vessel models; the VMS distribution were both lower in stenosed sites and the absolute value of local VMS was higher in non-uniform thickness model than in uniform model. More accurate coronary structures and personalized flow and pressure boundary conditions were described based on the medical image, which is not only of great significance to studying relationship between hemodynamic, mechanical factors and cardiovascular disease, but also to serving patient-specific diagnosis and treatment.
徐创业, 刘修健, 吴广辉, 何玉娜, 舒丽霞, 蔺嫦燕. 出口边界条件和壁厚对冠状动脉壁面剪切力和冯米塞斯应力的影响[J]. 中国生物医学工程学报, 2016, 35(4): 428-434.
Xu Chuangye, Liu Xiujian, Wu Guanghui, He Yuna, Shu Lixia, Lin Changyan. Effects of Outlet Boundary Condition and Wall Thickness on Wall Shear Stress and von Mises Stress in Coronary Artery. Chinese Journal of Biomedical Engineering, 2016, 35(4): 428-434.
[1] Eshtehardi P, McDaniel MC, Suo J, et al. Association of coronary wall shear stress with atherosclerotic plaque burden, composition, and distribution in patients with coronary artery disease [J]. Journal of the American Heart Association, 2012, 1(4): e002543.
[2] Samady H, Eshtehardi P, McDaniel MC, et al. Coronary artery wall shear stress is associated with progression and transformation of atherosclerotic plaque and arterial remodeling in patients with coronary artery disease [J]. Circulation, 2011, 124(7): 779-788.
[3] Timmins LH, Molony DS, Eshtehardi P, et al. Focal association between wall shear stress and clinical coronary artery disease progression [J]. Annals of Biomedical Engineering, 2015, 43(1): 94-106.
[4] Koskinas KC, Chatzizisis YS, Papafaklis MI, et al. Synergistic effect of local endothelial shear stress and systemic hypercholesterolemia on coronary atherosclerotic plaque progression and composition in pigs [J]. International Journal of Cardiology, 2013, 169(6): 394-401.
[5] Chatzizisis YS, Jonas M, Coskun AU, et al. Prediction of the localization of high-risk coronary atherosclerotic plaques on the basis of low endothelial shear stress an intravascular ultrasound and histopathology natural history study [J]. Circulation, 2008, 117(8): 993-1002.
[6] Stone PH, Coskun AU, Kinlay S, et al. Regions of low endothelial shear stress are the sites where coronary plaque progresses and vascular remodeling occurs in humans: an in vivo serial study. European Heart Journal, 2007, 28(6): 705-710.
[7] Teng Zhongzhao, Brown AJ, Calvert PA, et al. Coronary plaque structural stress is associated with plaque composition and subtype and higher in acute coronary syndrome: the BEACON I (Biomechanical Evaluation of Atheromatous Coronary Arteries) study [J]. Circulation Cardiovascular Imaging, 2014, 7(3): 461-470.
[8] Sun Zhonghua, Xu Lei. Coronary CT angiography in the quantitative assessment of coronary plaques [J]. BioMed Research International, 2014, 2014:346380.
[9] Maurovich-Horvat P, Ferencik M, Voros S, et al. Comprehensive plaque assessment by coronary CT angiography [J]. Nature Reviews Cardiology, 2014, 11(7): 390-402.
[10] Yang Chun, Canton G, Yuan Chun, et al. Advanced human carotid plaque progression correlates positively with flow shear stress using follow-up scan data: an in vivo MRI multi-patient 3D FSI study [J]. Journal of Biomechanics, 2010, 43(13): 2530-2538.
[11] Fan Rui, Tang Dalin, Yang Chun, et al. Human coronary plaque wall thickness correlated positively with flow shear stress and negatively with plaque wall stress: an IVUS-based fluid-structure interaction multi-patient study [J]. Biomedical Engineering Online, 2014, 13(1): 32.
[12] Tang Dalin, Li Zhiyong, Gijsen F, et al. Cardiovascular diseases and vulnerable plaques: data, modeling, predictions and clinical applications [J]. Biomedical Engineering Online, 2015, 14 Suppl 1(S1).
[13] Zhang Junmei, Zhong Liang, Su Baoyang, et al. Perspective on CFD studies of coronary artery disease lesions and hemodynamics: a review [J]. International Journal for Numerical Methods in Biomedical Engineering, 2014, 30(6): 659-680.
[14] Torii R, Wood NB, Hadjiloizou N, et al. Fluid-structure interaction analysis of a patient-specific right coronary artery with physiological velocity and pressure waveforms [J]. Communications in Numerical Methods in Engineering, 2009, 25(5): 565-580.
[15] Feldman CL, Ilegbusi OJ, Hu Zhenjun, et al. Determination of in vivo velocity and endothelial shear stress patterns with phasic flow in human coronary arteries: a methodology to predict progression of coronary atherosclerosis [J]. American Heart Journal, 2002, 143(6): 931-939.
[16] Chaniotis AK, Kaiktsis L, Katritsis D, et al. Computational study of pulsatile blood flow in prototype vessel geometries of coronary segments [J]. Physica Medica, 2010, 26(3): 140-156.
[17] Siogkas P, Sakellarios A, Exarchos T, et al. Blood flow in arterial segments: Rigid vs. deformable walls simulations [J]. Journal of the Serbian Society for Computational Mechanics, 2011, 5(1): 69-77.
[18] Peiffer V, Sherwin SJ, Weinberg PD. Does low and oscillatory wall shear stress correlate spatially with early atherosclerosis? A systematic review [J]. Cardiovascular Research, 2013, 99(2): 242-250.
[19] Moon JY, Suh DC, Lee YS, et al. Considerations of blood properties, outlet boundary conditions and energy loss approaches in computational fluid dynamics modeling [J]. Neurointervention, 2014, 9(1): 1-8.
[20] Vignon-Clementel IE, Figueroa CA, Jansen KE, et al. Outflow boundary conditions for 3D simulations of non-periodic blood flow and pressure fields in deformable arteries [J]. Computer Methods in Biomechanics and Biomedical Engineering, 2010, 13(5): 625-640.
[21] Sadat U, Teng Zhongzhao, Gillard JH. Biomechanical structural stresses of atherosclerotic plaques [J]. Expert Review of Cardiovascular Therapy, 2010, 8(10): 1469-1481.
