基于3D打印细胞培养支架内部血管通道的模拟与构建

doi:10.3969/j.issn.0258-8021. 2017. 01.009

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (5966 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The three-dimensional scaffold cell culture technology has achieved a good spatial structure in the process of cell cultivation; however there are still lack of channel structures such as vascular network in the 3D scaffolds. Therefore current 3D scaffolds can not entirely simulate the growing environment of internal cells of the human body. Referring to the method of constrained structure optimization, this article built a simulated three-dimensional vascular network that was constructed inside the STL model of biological scaffold by computer software on the basis of common three-dimensional biological scaffold and created a new kind of three-dimensional biological scaffold model and printed the material objects using 3D biological printer. Through the statistical analysis of scaffold model and compared with the digital model, the differences between the printed scaffold model and the digital model were within 5%, which met the design requirements. By this technique the liquid circulation inside the cell culture scaffold was increased and the structure of scaffold was closer to the internal environment of the human body. The research can also make it possible to simulate and figure out factors of affecting the liquid circulation inside the human body has on the growth of cells.

Key words： 3D biological printing technique cell scaffolds simulation of vascular network

Received: 20 November 2015

PACS:

R318

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Chong
	Xu Mingen
	Wang Ling
	Song Jiangxin

Cite this article:

Liu Chong,Xu Mingen,Wang Ling, et al. Simulation and Fabrication of Vascular Network in Biological Scaffolds Based on Three-Dimensional Cell Printing Technique[J]. Chinese Journal of Biomedical Engineering, 2017, 36(1): 67-74.

URL:

http://cjbme.csbme.org/EN/10.3969/j.issn.0258-8021. 2017. 01.009 OR http://cjbme.csbme.org/EN/Y2017/V36/I1/67

[1] 甘露,张志辉,吕美娜,等. 细胞培养技术 [J]. 组织工程研究与临床康复, 2008, 12(29): 5739-5742.
[2] 胡康洪,姚颖. 三维细胞培养技术的研究与应用 [J]. 医学分子生物学杂志, 2008, 5(2): 185-188.
[3] 王颖钰,陆茵,张伟伟,等. 三维细胞培养技术在肿瘤研究领域的应用 [J]. 中国药理学通报, 2009, 25(12): 1545-1548.
[4] 罗南书,罗南英. 体外肝细胞培养及在药物筛选中的应用 [J]. 中国生物医学工程学报, 2015, 34(1): 91-98.
[5] 石然. 基于细胞3D打印技术的肿瘤模型构建研究 [D].杭州: 杭州电子科技大学, 2015.
[6] He Jiankang, Li Dichen, Liu Yaxiong, et al. Fabrication and characterization of chitosan/gelatin porous Scaffolds with predefined internal microstructures [J]. Science Direct Polymer, 2007, 48: 4578-4588.
[7] Bael SV, Kerckhofs G, Moesen M, et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures [J]. Materials Science and Engineering A, 2011, 548: 7423-7431.
[8] Kretowski M, Rolland Y, Bezy-Wending J, et al. Physiologically based modeling of 3D vascular networks and CT scan angiography [J]. IEEE Transactions on Medical Imaging, 2003, 22: 248-257.
[9] 刘辉凤. 微血管网络形态及形成机制 [J]. 中国微循环, 2009, 13(3): 219-222.
[10] 张艳,张于峰,诸凯,等. 三维动脉血管树的模拟与分析 [J]. 天津大学学报, 2007, 40(9): 1071-1076.
[11] Schreiner W, Buxbaum PF. Computer-optimization of vascular trees [J]. IEEE Transactions on Biomedical Engineering, 1993, 40: 482-490.
[12] Karch R, Neumann F, Neumann M, et al. A three-dimensional model for arterial tree representation generated by constrained constructive optimization [J]. Computer in Biology and Medicine, 1999, 299: 416-429.
[13] Schreiner W, Karch R, Neumann M, et al. Optimized arterial trees supplying hollow organs [J]. Medical Engineering and Physics, 2006, 28: 416-429.
[14] 姜华斌,向占宏. 关于血管分支的数学模型 [J]. 太原师范学院学报(自然科学版), 2005, 4(1): 19-21.
[15] 王洵,周卫平,罗立民. 一种基于广义柱的脑血管树建模方法 [J]. 生物医学工程研究, 2007, 26(2): 174-177.
[16] 王润科,张彦丽. 判断点与多边形位置关系的算法综述 [J]. 甘肃联合大学学报(自然科学版), 2006, 20(6): 32-35.
[17] Karch R, Neumann F, Neumann M. A three-dimensional model for arterial tree representation generated by constrained constructive optimization [J]. Computers in Biology and Medicine, 1999, 29: 19-38
[18] 罗治国. 空间圆的参数方程及其应用 [J]. 湖南师范大学自然科学学报, 2012, 35(6): 24-26.
[19] 陈剑虹,田杰谟,刘振凯,等. 由断层测量数据直接生成STL 文件的方法 [J]. 机械科学与技术, 2003, 22(6): 882-884.
[20] 潘如刚. 基于断层轮廓数据的三维形体网格构造方法研究 [D].杭州:浙江大学, 2004.
[21] 陈作炳,毛娅,阎玉华,等. 人工关节RPM系统中STL文件的生成 [J]. 武汉工业大学学报, 2000, 22(4): 37-39.